China Exploration Instrument Online Market

High quality, Best service,Reasonable price.

Home ProductsEnvironmental Test Chambers

304 Stainless Steel Environmental Test Chambers , Industrial UV Lamp Aging Tester

304 Stainless Steel Environmental Test Chambers , Industrial UV Lamp Aging Tester

  • 304 Stainless Steel Environmental Test Chambers , Industrial UV Lamp Aging Tester
  • 304 Stainless Steel Environmental Test Chambers , Industrial UV Lamp Aging Tester
  • 304 Stainless Steel Environmental Test Chambers , Industrial UV Lamp Aging Tester
  • 304 Stainless Steel Environmental Test Chambers , Industrial UV Lamp Aging Tester
304 Stainless Steel Environmental Test Chambers , Industrial UV Lamp Aging Tester
Product Details:
Place of Origin: Guangdong, China (Mainland)
Brand Name: HAIDA
Certification: ISO 9001:2000; ISO 9001:2008; QS-9000; ISO 14001:2004; CE, , SMC, CMC, CPA, CE,CMA,IMC
Model Number: HD-E802-2
Payment & Shipping Terms:
Minimum Order Quantity: 1 Set
Price: Negotiable
Packaging Details: Each set protected with resin fiber and PP film, then put into Strong wooden case with operation man
Delivery Time: 20 days after order confirmed
Payment Terms: L/C,D/A,D/P,T/T,Western Union,MoneyGram,In cash, escrow
Supply Ability: 300 Sets per Month Haida
Contact Now
Detailed Product Description
Power: Electric Product Name: Environmental Testing Chambers
Type: UV Lamp Aging Testing Chamber Overall Size (W×D×H): 1340mm×530 Mm×1400 Mm
Materials: SUS#304 Stainless Steel Temperature Control: PID Self - Tuning Temperature Control Mode
High Light:

environmental testing chamber

,

humidity temperature test chamber

304 Stainless Steel Environmental Test Chambers , Industrial UV Lamp Aging Tester

 

1.  Product description
UV lamp aging testing chamber is applicable for the sunlight resistant test of nonmetallic materials and aging test of artificial light sources. A variety of industrial products can make the reliability test, and this product can simulate the product in the sun, rain, humidity and dew conditions, including damage caused by bleaching, color, brightness down, powder, crack, blur, brittle, intensity decreased and oxidation.
  

2. Technical parameters:
 Accelerated Weather UV test machine

Studio size (W×D×H) 1140mm×400mm×500mm
Overall size (W×D×H) 1340mm×530 mm×1400 mm
Center distance of the lamp 70mm
Wavelength range uv-a wavelength range of 315 to 400nm, the peak at about 340nm
Radiation intensity within 1W/m2/340nm
Temperature resolution 0.1℃
Light temperature range 50℃~70℃ / temperature tolerance is ±3℃
Condensation temperature range 40℃~60℃ / temperature tolerance of ±3℃
Measuring range of blackboard thermometer 30~80℃ / tolerance is ±1℃
Temperature control mode PID self - tuning temperature control mode
Humidity range about 45%~70% r.h.
Water tank requirements water depth not more than 50mm, and with an automatic water supply controller
Standard specimen size 75×150mm 48pcs
Recommended operating environment 5~35℃, 40%~85%R•H, 300mm away from the wall
Voltage 220V±5%, single-phase three-wire, 50Hz, 10A, required 15A leakage switch
Lamp selection domestic huaqiang lamp/American Atlecs lamp
The distance between the specimen and the nearest parallel surface of the lamp surface is about 50mm±2mm

 
3. Chamber Structure:
Accelerated Weather UV test machine
The inner bladder of the chamber is made of imported high-class stainless steel plate while the outer bladder is made of SUS 304 steel plate.
The heating mode adopts inner bladder trough type heating with its rapid temperature rise and even temperature distribution.
 

4. Control System:
Adopts black aluminum plate to connect temperature sensor and adopts black board temperature meter to control heating so as to ensure more stable temperature.
The radiometer probe is fixed so as to avoid the frequent installation and disassembly.
The radiation quantity adopts the special UV irradiatometer with high-precision display and measurement.
The radiation intensity is not more than 50W/m2.
The illumination and condensation can be controlled independently or alternating and circularly.

 

5. Test Specimen Mounting:
 Accelerated Weather UV test machine
The standard test specimen holder accommodates 2 panels 75×150mm. The test panels are actual the side wall of the chamber. To properly seal the chamber, it is important to have every panel holder filled with specimens or blank panels and to have panel holders in place.
 

6. Design criteria:
 Accelerated Weather UV test machine
 (1) ASTM D4587: Standard Practice for Fluorescent UV-Condensation Exposures of Paint and Related Coatings
(2) ASTM D4799: Standard Practice for Accelerated Weathering Test Conditions and Procedures for Bituminous Materials (Fluorescent UV, Water Spray, and Condensation Method)
(3) ISO 4892-1: Plastics – Methods of Exposure to Laboratory Light Sources – Part 1: General guidance
(4) ISO 4892-3: Plastics - Methods of Exposure to Laboratory Light Sources - Part 3: Fluorescent UV Lamps
(5) ASTM D4329: Standard Practice for Fluorescent UV Exposure of Plastics
(6) AATCC TM186: Weather Resistance: UV Light and Moisture Exposure
(7) ASTM D5208: Standard Practice for Fluorescent Ultraviolet (UV) Exposure of Photodegradable Plastics
(8) IEC 61345: UV Test for Photovaltalic (PV) Modules 

 

UV Accelerated Weathering Tester_pdf.pdf

 

304 Stainless Steel Environmental Test Chambers , Industrial UV Lamp Aging Tester 0

Contact Details
China Exploration Instrument Online Market
Send your inquiry directly to us (0 / 3000)

Other Products